ALUMINUM-PLASTIC COMPOSITE TAPE (ELE)
ELE is composed of vinyl copolymer and aluminum tape. Copolymer is transparent or blue with good adhesive force and anti-corrosion. Aluminum tape has no impurity with good electro conductivity. Its surface is best EAAA. So compared with common PE tape, its advantages are low cohesive temperature and high adhesive property. It could decrease the working temperature and airflow of hot air gun, and also could avoid using hot air gun. Surface of composite tape is smooth, no wrinkle, no oxidation spot and rewinding edge smooth.
Technical Indicator：
No. |
Item |
Requirement |
|
1 |
Tensile strength Mpa |
≥54 |
|
2 |
Elongation at break % |
≥15 |
|
3 |
Stripping strength between aluminum tape and plastic film N/cm |
≥6.13 |
|
4 |
Shear strength of thermal zone for ELE |
ELE broken or cohere destroyed between film and tape, but no shearing destroyed in thermal zones |
|
5 |
Thermal sealing strength N/cm |
≥17.5 |
|
6 |
Water proof（68±1℃168h） |
≥6.13 |
|
7 |
The filling compound resistance（68±1℃168h） |
No delamination between aluminum tape with plastic film |
|
8 |
Corrosion resistance（0.1mol/l,NaoH,480h） |
≥7级 |
|
9 |
Dielectric strength |
Not breakdown |
|
Double face EGE, 2kVd.c.1.min |
Not breakdown |
||
location：